VELOCITY COMPENSATOR FOR SIG P320

Killer Innovation’s Velocity Compensator is “braking” all the rules! This compensator significantly reduces recoil and muzzle climb and attaches in an innovative new way that is completely different than any other compensator on the market. This revolutionary attachment system has a few advantages over the traditional methods.

First: It can be installed and removed without using tools when using our Velocity or Sancer barrels. Cleaning your gun just got a whole lot easier! When used with other brand barrels, tools will be required to add or remove the comp, but accuracy will be maintained.

Second: The compensator pushes all the way back to the thread shoulder when installed. This provides a superior bore alignment to other comps that are timed short of the shoulder, then set screwed or clamped to the threads. This bore alignment accuracy ensures the bullet is passing directly down the center of the comp with an equal air gap around the bullet. This equal air gap eliminates the air pushing to one side and wobbling your bullet. Accuracy down range is the ultimate goal!

Every professional shooter we let shoot this comp during testing said this was the flattest shooting comp they had ever shot. We agree! We adjusted the ports and tuned this comp for months before we were satisfied that we had made it shoot as flat as possible and still reliably cycle the slide.

If you want a compensator that is extremely accurate and installs easier than any other comp on the market, look no further, we’ve got you covered!

As always, made 100% in the USA.

SPECIFICATIONS:

• 7075 T6 Aluminum
• 1.584 oz
• 1/2-28 Threads
• Black Nitride finish on hardware
• All comps come with the Reduced Port Locking Ring (read more about it here)
• For use with 9MM only
• Compatible with: P320C slides using a 3.9″ Barrel*

Comp for Sig Installation Instructions

KI Sig P320 Compensator Notch and Dimple Drawing

Velocity Comp Tuning Info

*Due to some rolling changes in designs made by Sig, there is a chance that our parts may not be compatible with your specific gun, despite being noted as compatible with the variation.  Please test fit parts CAREFULLY to avoid damage, in case of incompatibility.  We will return or exchange undamaged parts.

Due to differences in metal composition and finishing processes, Killer Innovations cannot guarantee exact color matches among our accessory items.  For more information please see our detailed explanation.