Only logged in customers who have purchased this product may leave a review.
Velocity Compensator for Glock
- For Glock 19 & 17 Gen 3
- For Glock 19 & 17 Gen 4
- For Glock 19 & 17 Gen 5 & 19x & G45
**If you are running a Glock 19 you will need a 13 lb Recoil Spring**
*Killer Innovations is not responsible if you purchase an item, you cannot legally possess in your state, county, or city. Some states, including but not limited to: Washington, California, New York, Massachusetts, Connecticut, Hawaii, and New Jersey, restrict the sale and ownership of certain firearms and/or firearm parts and accessories. It is your responsibility to know your state and local laws before making a purchase at Killer Innovations.
Killer Innovation’s Velocity Compensator is “braking” all the rules! This compensator significantly reduces recoil and muzzle climb and attaches in an innovative new way that is completely different than any other compensator on the market. This revolutionary attachment system has a few advantages over the traditional methods.
First: It can be installed and removed without using tools when using our Velocity and Sancer barrel. Cleaning your gun just got a whole lot easier! When used with other brand barrels, tools will be required to add or remove the comp, but accuracy will be maintained.
Second: The compensator pushes all the way back to the thread shoulder when installed. This provides a superior bore alignment to other comps that are timed short of the shoulder, then set screwed or clamped to the threads. This bore alignment accuracy ensures the bullet is passing directly down the center of the comp with equal air gap around the bullet. This equal air gap eliminates the air pushing to one side and wobbling your bullet. Accuracy down range is the ultimate goal!
Every professional shooter we let shoot this comp during testing said this was the flattest shooting comp they had ever shot. We agree! We adjusted the ports and tuned this comp for months before we were satisfied that we had made it shoot as flat as possible and still reliably cycle the slide with a 13lb spring.
If you want a compensator that is extremely accurate and installs easier than any other comp on the market, look no further, we’ve got you covered!
As always, made 100% in the USA.
- 7075 T6 Aluminum
- 2.1 oz
- 1.45″ Overall Length
- 1″ Wide
- 1/2-28 Threads
- Black Nitride finish on hardware
- All comps now come with the Reduced Port Locking Ring (read more about it here)
- For use with 9MM only
Due to differences in metal composition and finishing processes, Killer Innovations cannot guarantee exact color matches among our accessory items. For more information please see our detailed explanation.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.